INSTALLATION (continued)
Cabling
Refer to the table below for connecting each terminal of the projector to a device.
Table 2. Cabling
Function | Terminal | Cable | |
|
|
| |
|
|
| |
| RGB | Accessory RGB cable or optional RGB | |
Analog RGB input | cable with | ||
|
| inch thread screws | |
|
|
| |
CONTROL | Optional | ||
|
|
| |
Audio input | AUDIO | Optional audio cable with stereo mini jack | |
(from the computer) | |||
|
| ||
|
|
| |
| COMPONENT VIDEO Y |
| |
|
|
| |
Component video input | COMPONENT VIDEO CB/PB | Accessory component video cable | |
|
|
| |
| COMPONENT VIDEO CR/PR |
| |
|
|
| |
Optional | |||
jack | |||
|
| ||
|
|
| |
Video input | VIDEO |
| |
|
| Optional video/audio cable with RCA jack | |
Audio input | AUDIO L | ||
| |||
|
| ||
(from video equipment) | AUDIO R |
| |
|
|
|
CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.
•Before connecting, turn off to all devices to be connected, except for the USB cable.
•The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.
NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device.
•Secure the screws on the connectors and tighten.
•For some RGB input modes, the optional Mac adapter is necessary.
•To select the digital RGB input, the comuter may need some settings. See the manuals of the computer for details.
•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.
•Refer to the “TECHNICAL” section for the pin assign ment of connectors.
•Refer to manual of the optional
•For others, consult your dealer.
