Input Menu

The following functions are available when INPUT is selected on the menu. Select an item with the and buttons, and start operation.

Table 5. Input Menu

Item	Description
	Operation Start/Stop: Press the	/	button.
	Automatic Adjustment at RGB Input: Select the EXECUTE with the
	button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock
AUTO	phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.
	Use with the window at maximum size in the application display.
	• This operation requires approximately 10 seconds. It may not function correctly with
	some input signals. Pressing the AUTO button in this case may correct this problem.
	• This function is the same as for the AUTO function in Basic operation.

RGB	Displays RGB Input Frequency:
RGB	Displays the horizontal and vertical sync signal frequencies for RGB input.
	• Valid only at RGB input.

	Operation Start/Stop: Press the	/	button.
	Select Video Signal Type: Select the signal type with the and
	buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as
	appropriate for the input signal. The selection of AUTO enables and
	executes the function AUTO (Automatic Adjustment at Video Input), except
VIDEO	for the N-PAL input.
VIDEO	• Use this function when the image becomes unstable (eg. the image becomes

	irregular, or lacks color) at VIDEO/S-VIDEO input.
	• Automatic Adjustment requires approximately ten seconds. It may not function
	correctly with some input signals. Pressing the AUTO button in this case may correct
	this problem except for the N-PAL input.
	• For the COMPONENT VIDEO input, this function is not effective and the signal
	type is distinguished automatically.

	Operation Start/Stop: Press the / button.
HDTV	Select HDTV Mode: Select the 1080i mode or 1035i mode suitable for the
HDTV	input signal with the / button.

•When the selected HDTV mode is incompatible with the input signal, the image may be incorrect (eg. the display position or color is incorrect).

ENGLISH-12