![](/images/new-backgrounds/1215263/21526341x1.webp)
Setting up
About the filter cover for bottom-up use
WARNING ►Do not replace the filter cover during use or immediately after use. While the projector connects with a power supply, or the projector is in a high temperature state, handling could cause an electric shock, a fire, a burn and/or malfunction to the projector.Before handling, make sure the power switch is off and the power cord is not plugged in, then wait at least 45 minutes.
When the projector is installed bottom up, please use the accessory filter cover for
Filter cover’s knob | Filter cover’s knob |
|
ENGLISH
Filter cover
To remove | To set |
Filter cover for
1. After making sure that the projector is cool adequately, slowly turn the projector so that the
not to fall. While the projector is placed
2. Putting a finger on the filter cover’s knob, slide the filter cover in the direction of the arrow to remove it.
3. Replace the filter cover for
4. Slowly turn the projector so that the top is facing up.
9