Dukane 8107WIB user manual Connection, Command Control via the Network

1.

2.

Command Control via the Network

Command Control via the Network

When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser.

For details of RS-232C commands, refer to RS-232C Communication / Network command table (&17).

Connection

Turn off the projector and the computer.

Connect the projector's LAN port and the computer's LAN port with a LAN cable. Use the cable that fulfi lls the specifi cation shown in fi gure (Use CAT-5

or greater LAN Cable when LAN ports are used )

3. Turn the computer on, and after the computer has started up turn the projector on.

LAN cable (CAT-5 or greater)

LAN LAN

11