Dukane 8762 ￿Correcting Keystone Distortion Manually, 3.Select the Keystone function, General] and then press the ENTER button, 2.Use the SELECT  button to select [Setup

3. Projecting an Image (Basic Operation)

￿Correcting Keystone Distortion Manually

You can also correct the vertical keystone distortion manually.

NOTE: Manual keystone correction is not available when there is no signal received by any input.

Adjust the keystone distortion manually in the following cases:

•To fine tune Keystone correction even after performing the [Auto Keystone] adjustment.

•When the menu setting for [Auto Keystone] is turned off

Adjusting with buttons on the cabinet

1.Press the SELECT
or  button with no menus displayed.

The slide bar will be displayed for your adjust- ment.

2.Press the EXIT button. The slide bar will be closed.

SELECT

LAMP
STATUS
POWER
ON/STAND BY SOURCE	AUTO ADJ.	FOCUS

Adjusting with the remote control

1.Press the MENU button. The menu will be displayed.

2.Use the SELECT  button to select [Setup -General] and then press the ENTER button.3.Select the Keystone function.

Use the SELECT  button to select [Keystone].

25