3. Projecting an Image (Basic Operation)

￿Turning off the Projector

To turn off the projector:

First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The “Power Off / Are you sure?” message will appear.

Secondly, press the ENTER button or press the POWER (ON/STAND BY) or the POWER OFF button again.

The power indicator will glow orange.

Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 sec- onds.

About Direct Power Off

 

 

OFF

ON

 

 

POWER

 

LAMP

 

FOCUS PIC-MUTE

PAGE

STATUS

 

 

UP

POWER

SOURCE

AUTO ADJ.

 

ON/STAND BY

DOWN

 

 

 

 

 

MENU

 

 

 

ENTER

EXIT

Power On

Fan running

Standby

LAMP

LAMP

LAMP

STATUS

STATUS

STATUS

POWER

POWER

POWER

Steady green light

Blinking

Steady orange

 

orange light

light

The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when projecting an image) using a power strip equipped with a switch and a breaker.

NOTE: Do not turn off the projector using the "Direct Power Off" function within 10 seconds of making adjustment or setting changes and closing the menu.

Doing so can cause loss of adjustments and settings.

CAUTION:

Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.

TIP: To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker.

TIP: The projector can be unplugged during its cool down period after it is turned off.

CAUTION:

Parts of the projector will become heated during operation. Use caution when picking up the projector immediately after it has been operating.

￿After Use

Preparation: Make sure that the projector is turned off.1.Unplug the power cable.2.Disconnect any other cables.3.Retract adjustable tilt foot if extended.4.Cover the lens with the lens cap.5.Put the projector and its accessories in the supplied soft case.

CAUTION:

Use caution when putting the projector in the soft case immediately after the projector has been operating. The projector cabinet is hot.

27