Lamp

WARNING

HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE

The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.

About disposal of a lamp • This product contains a mercury lamp; do not put in trash. Dispose of in accord with environmental laws.

For lamp recycling, go to www.lamprecycle.org. (in USA)

For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).

For more information, call your dealer.

 

• If the lamp should break (it will make a loud bang when it does), unplug

 

the power cord from the outlet, and make sure to request a replacement

 

lamp from your local dealer. Note that shards of glass could damage the

 

projector’s internals, or cause injury during handling, so please do not try to

 

clean the projector or replace the lamp yourself.

 

• If the lamp should break (it will make a loud bang when it does), ventilate

Disconnect

the room well, and make sure not to breathe the gas that comes out of the

the plug from

projector vents, or get it in your eyes or mouth.

the power

outlet

• Before replacing the lamp, make sure the power switch is off and the

 

power cable is not plugged in, then wait at least 45 minutes for the lamp to

 

cool sufficiently. Handling the lamp while hot can cause burns, as well as

 

damaging the lamp.

 

 

 

• Do not open the lamp cover while the projector is suspended from above.

 

This is dangerous, since if the lamp’s bulb has broken, the shards will

 

fall out when the cover is opened. In addition, working in high places is

 

dangerous, so ask your local dealer to have the lamp replaced even if the

 

bulb is not broken.

 

• Do not use the projector with the lamp cover removed. At the lamp

 

replacing, make sure that the screws are screwed in firmly. Loose screws

 

could result in damage or injury.

 

 

 

 

• Use

the lamp of the specified type only.

 

• If the lamp breaks soon after the first time it is used, it is possible that

there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.

• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

• Using the lamp for long periods of time, could cause it dark, not to light up or to burst. When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage.



Page 8
Image 8
Dukane 8763 user manual Lamp

8763 specifications

The Dukane 8763 is a cutting-edge ultrasonic welding machine known for its efficiency and precision in various industrial applications. Its design integrates advanced technologies that empower manufacturers to achieve high-quality, consistent welds across a wide range of materials, particularly in the plastics industry.

One of the standout features of the Dukane 8763 is its sophisticated ultrasonic technology. Utilizing high-frequency sound waves, this machine creates localized heat at the interface of the materials being joined. This results in strong, durable bonds without the need for additional adhesives or fasteners, making the welding process cleaner and more environmentally friendly.

The Dukane 8763 is equipped with a powerful 15 kHz ultrasonic generator. This generator ensures reliable power delivery and optimal performance, allowing for seamless operation even in demanding production environments. Additionally, the machine features a range of amplitude settings that can be adjusted to suit specific materials and joint designs, providing versatility for various applications.

Another key characteristic of the Dukane 8763 is its user-friendly interface. The machine includes an intuitive control panel that allows operators to easily set parameters and monitor the welding process in real-time. This feature not only enhances user experience but also reduces the likelihood of operator errors, ensuring consistent quality in every weld.

The Dukane 8763 also incorporates advanced monitoring and diagnostics capabilities. With built-in sensors, the machine can detect changes in welding parameters, helping to identify potential issues before they lead to defective products. This proactive approach to quality control is essential for manufacturers who prioritize reliability and efficiency in their operations.

In terms of safety, the Dukane 8763 is designed with protective features to ensure a safe working environment for operators. The machine includes emergency stop functions and safety interlocks, which prevent accidental operation when maintenance is required.

Furthermore, the robust construction of the Dukane 8763 allows it to endure the rigors of heavy industrial use. Made with high-quality materials and designed for longevity, this machine provides both durability and low maintenance requirements.

In summary, the Dukane 8763 is a high-performance ultrasonic welding machine that combines advanced technology with user-friendly features. It is an ideal solution for manufacturers seeking efficient and reliable welding processes for a variety of materials. With its precision welding capabilities, built-in diagnostics, and focus on operator safety, the Dukane 8763 stands out in the competitive landscape of industrial welding equipment.