Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device.
Consult your dealer when the required accessory did not come with the product or the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the connection, according to the following instructions. Refer to figures
For details, see User’s Manual - Operating Guide.
WARNING ►Use only the appropriate accessories. Otherwise it could
cause a fire or damage the projector and devices.
•Use only the accessories specified or recommended by the projector’s manufacturer. It may be regulated under some standard.
•Neither disassemble nor modify the projector and the accessories.
•Do not use the damaged accessory. Be careful not to damage the accesso- ries. Route a cable so that it is neither stepped on nor pinched out.
CAUTION ►For a cable with a core at only one end, connect the end with
the core to the projector. That may be required by EMI regulations.
NOTE • Do not turn on or off the projector while connected to a device in operation, unless that is directed in the manual of the device.
•Some input ports are selectable in the use. For details, see User’s Manual -
Operating Guide.
•Be careful not to mistakenly connect a connector to a wrong port.
ENGLISH
7
