Main
Page
Projector
User Manual Operating Guide
About this manual
Contents
Projector features
1.
Fastening the lens cap
3.
2.
Part names
Projector
turning on again, make the projector cool down at least 10 minutes without
please push the Restart switch by using a cocktail stick or similar, and before
operate correctly and the microprocessor will need to be reset. In such a case,
Control buttons
Remote control
Setting up
7
Arrangement
down
max.
min.
down
1.
3.
2.
About the lter cover for bottom-up use
1.
3.
2.
4.
Connecting your devices
11
Y VIDEO
Stereo mini audio cable
Audio in
Examples of connection with a computer
USB(A) RS-232C DVI out DVI cable
Stereo mini audio cable
* AUDIO IN is linked to RGB IN1/2 and
DVI-D.
Examples of connection with a VCR/DVD player
Connecting power supply
1.
2.
Putting batteries
2.
Laser pointer
Remote control
Using the remote control
Power on/off
Turning on the power
Turning off the power
Operating
Adjusting the volume
Temporarily muting the sound
Selecting an input signal
Adjusting the zoom and focus
Adjusting screen with ONE-TOUCH
Selecting an aspect ratio
Using the automatic adjustment feature
Adjusting the position
Using the magnify feature
Correcting the keystone distortions
Freezing the screen
Temporarily blanking the screen
Operating the computer screen
Mistaken use of the mouse/keyboard control could damage
CAUTION
your equipment.
Connect the projectors USB port to the computer via the mouse cable.
1.
3.
5.
4.
3.
EASY Menu
following table.
projector or remote control. Then perform it referring to the
Select an item using the cursor buttons / on the
be performed.
EASY Menu (continued)
PICTURE Menu
the remote control to progress. Then perform it referring to
on the projector or remote control, or the ENTER button on
projector or remote control, and press the cursor button
Select an item using the cursor buttons / on the
Page
PICTURE Menu (continued)
IMAGE Menu
the following table.
the remote control to progress. Then perform it referring to
on the projector or remote control, or the ENTER button on
projector or remote control, and press the cursor button
IMAGE Menu (continued)
VIDEO Qlty. Menu
With the VIDEO Qlty. menu, items shown in the table below can be performed.
the remote control to progress. Then perform it referring to
on the projector or remote control, or the ENTER button on
projector or remote control, and press the cursor button
INPUT Menu
Select an item using the cursor buttons / on the
the following table.
the remote control to progress. Then perform it referring to
be performed.
INPUT Menu (continued)
SETUP Menu
the following table.
the remote control to progress. Then perform it referring to
on the projector or remote control, or the ENTER button on
projector or remote control, and press the cursor button
SCREEN Menu
the following table.
the remote control to progress. Then perform it referring to
on the projector or remote control, or the ENTER button on
projector or remote control, and press the cursor button
below
SCREEN Menu (continued)
OPTION Menu
following table.
hen perform it referring to the
on the projector or remote control, or the ENTER button on
Select an item using the cursor buttons / on the
OPTION Menu (continued)
NETWORK Menu
can be performed.
With the NETWORK menu, items shown in the table below
Select an item using the cursor buttons / on the projector or remote co ntrol,
hen perf
2.
3.
E
ex. Case of IP Address = 192.168.1.10
Page
4.
5.
Maintenance
Lamp WARNING
5.
1.
3.
9.
8.
1.
6.
10.
9.
8.
Other care
Troubleshooting
Related messages
The horizontal or vertical wavelength of the inputted
As the time the lamp timer has counted has reached
recommended.
Page
Regarding the indicator lamps
The lamp cover has not been properly xed
The lamp does not light, and there is a
displayed after the treatment, or if an indication other than the following is
displayed, please contact your dealer or service company.
Regarding the indicator lamps (continued)
The cooling fan is not operating.
There is a possibility that the interior portion has become heated.
There is a possibility that the interior portion has become overcooled.
It is time to clean the ai r
Phenomena that may easily be mistaken for machine defects
Phenomena that may easily be mistaken for machine defects (continued)
The
lens cap is attached.
The lens is d
The signal cables are not correctly connected.
Warranty and after-service
Specications
NOTE This specications are subject to change without notice.
Page
Page
Projector
CP-X443
User's Manual Operating Guide Technical
composite sync or a sync on G.
The image may not be displayed correctly when the input sync signal is a
Automatically adjustment may not function correctly with some input signals.
Initial set signals
58
The following signals are used for the initial settings. The signal timing of some
Connection to the ports
59
RGB IN 1,
Y
RGB OUT
DVI -D
60
COMPONENT VIDEO
Y, Y,
VIDEO
AUDIO IN ( AUDIO IN (
61
AUDIO INL/R (RCA jack) AUDIO INL/R (RCA jack)
WIRED REMOTE
DC OUT
1.
Connecting the cable
Command data chart
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
projector on.
