31
Multifunctional settings
VIDEO Qlty. Menu

With the VIDEO Qlty. menu, items shown in the table below

can be performed.

Select an item using the cursor buttons ▲/▼ on the

projector or remote control, and press the cursor button ►

on the projector or remote control, or the ENTER button on

the remote control to progress. Then perform it referring to

the following table.

Description
PRO
GRESSIVE
Using the buttons ▲/▼ switches the
progressive mode.
TV
FILM
TURN OFF
•
This function performs only at an interlaced signal of a VIDEO
input, a S-VIDEO input or a COMPONENT VIDEO input of 525i
(480i)
or 625i (576i)
signal.
•
When the TV or FILM is selected, the screen image will be crisper.
The FILM mode is adaptable to the 2-3 Pull-Down system to the
conversion.
Bu
t these may cause a certain defect (for example,
jagged line) of the picture at a quick moving object. In such a case,
please select the TURN OFF, even though the screen image may
lose the crisp.
3D-YCS
Using the buttons ▲/▼ switches
the
3D-YCS mode
.
STILL IMAGE
NORMAL
TURN OFF
•
This function performs only at a VIDEO input of NTSC 3.58.
•
NORMAL is the mode for images with a lot of motions like movies,
and STILL IMAGE is the mode for images with few motions or
completely still ones like slides.
•
When this function performs, the VIDEO NR function is ineffective.
VIDEO NR
Using the buttons ▲/▼ switches
the noise reduction mode
.
HIGH
MIDDLE
LO
W
•
This function performs only at a VIDEO input or a S-VIDEO input.
At a VIDEO input of NTSC 3.58, this function performs only when
the TURN OFF is selected under the 3D-YCS.
•
When the HIGH, the MIDDLE or the LOW is selected, the noise
on screen is reduced according to each mode.
•
When this function is excessive, it may cause a certain
degradation of the picture.
 MENU [RGB]
 IMAGE
 PICTURE
   :SELECT
 SETUP
 INPUT
 OPTION
 EASY MENU
 SCREEN
 VIDEO Qlty.
 NETWORK
 PROGRESSIVE  TURN OFF
 3D‑YCS       TURN OFF
 VIDEO NR     LOW