Lamp

WARNING

HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE

The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.

About disposal of a lamp • This product contains a mercury lamp; do not put in trash. Dispose of in accord with environmental laws.

For lamp recycling, go to www.lamprecycle.org. (in USA)

For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).

For more information, call your dealer.

• If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.

• If the lamp should break (it will make a loud bang when it does), Disconnect the ventilate the room well, and make sure not to breathe the gas that comes

plug from the

out of the projector vents, or get it in your eyes or mouth.

power outlet

• Before replacing the lamp, make sure the power switch is off and the

 

power cable is not plugged in, then wait at least 45 minutes for the lamp

 

to cool sufficiently. Handling the lamp while hot can cause burns, as well

 

as damaging the lamp.

 

 

 

• Do not open the lamp cover while the projector is suspended from above.

 

This is dangerous, since if the lamp’s bulb has broken, the shards will

 

fall out when the cover is opened. In addition, working in high places is

 

dangerous, so ask your local dealer to have the lamp replaced even if the

 

bulb is not broken.

 

• Do not use the projector with the lamp cover removed. At the lamp

 

replacing, make sure that the screws are screwed in firmly. Loose screws

 

could result in damage or injury.

 

 

 

• Use the lamp of the specified type only.

 

• If the lamp breaks soon after the first time it is used, it is possible that

 

there are electrical problems elsewhere besides the lamp. If this happens,

 

contact your local dealer or a service representative.

 

• Handle with care: jolting or scratching could cause the lamp bulb to burst

 

during use.

 

• If the indicators or a message prompts you to replace the lamp (see the

 

section “Related Messages” and “Regarding the indicator Lamps”),

 

replace the lamp as soon as possible. Using the lamp for long periods of

 

time, or past the replacement date, could cause it to burst. Do not use old

 

(used) lamps; this is a cause of breakage.

8

Page 58
Image 58
Dukane 8935 user manual Lamp

8935 specifications

The Dukane 8935 is a state-of-the-art ultrasonic plastic welding machine known for its advanced features, high efficiency, and versatility in various industrial applications. This model is particularly favored in the fields of automotive, medical, and consumer goods manufacturing, where precision and reliability are paramount.

One of the standout features of the Dukane 8935 is its robust ultrasonic technology. Utilizing high-frequency sound waves, the machine generates localized heat at the joint interface of plastic components, enabling a durable and strong bond without the need for additional adhesives or fasteners. This makes it an environmentally friendly choice for manufacturers who are aiming to reduce waste and increase production sustainability.

The Dukane 8935 is equipped with a powerful digital control system that allows for precise adjustments and monitoring during the welding process. Users can easily configure parameters such as power, time, and pressure to achieve optimal results for a wide range of materials and part geometries. The machine's intuitive touchscreen interface simplifies operation, making it accessible even for operators with minimal training.

Another significant characteristic of the Dukane 8935 is its advanced energy monitoring capabilities. This feature provides real-time feedback on energy consumption, allowing manufacturers to optimize their processes and reduce costs. Additionally, the machine's compact design and lightweight construction facilitate easy integration into existing production lines without requiring extensive modifications.

Moreover, the Dukane 8935 offers exceptional versatility, supporting multiple welding modes, including continuous and spot welding. This adaptability allows manufacturers to use the machine for various applications, from delicate medical devices to robust automotive components. The machine is also compatible with a wide range of thermoplastics, providing even more flexibility in production.

In terms of safety, the Dukane 8935 incorporates several protective features to ensure safe operation. These include automatic shut-off functions and safety interlocks that prevent the machine from operating when doors are open or when safety conditions are not met.

Overall, the Dukane 8935 represents an impressive convergence of technology, efficiency, and safety in the realm of ultrasonic welding, making it a preferred choice for diverse manufacturing sectors looking to enhance productivity and product quality. With its cutting-edge features, the Dukane 8935 continues to set a standard in ultrasonic welding technology.