Dukane 8940 Power ON/OFF, 2, 3, 4, 3

14

VIDEO RGBSEARCH

MAGNIFY

ASPECT AUTOBLANK

VOLUME

PinP

Turning On The Power

WARNING • When the power is ON, a strong light is emitted. Do not look

into the lens or vents of the projector.

• Turn the power on/off in right order. Please power on the projector before

the connected devices. Power off the projector after the connected devices.

NOTE

Power ON/OFFPower ON/OFF

Remove the lens cap.

2Set the power switch to [ | ] (ON).

The STANDBY/ON indicator will light to

solid orange.

STANDBY/ON

STANDBY/ON button /

indicator

Power switch (ON position)

STANDBY/ON

button

3Press the STANDBY/ON button.

The projector lamp will light up and the

STANDBY/ON indicator will begin blinking

green.

When the power is completely on, the

indicator will stop blinking and light green.

4Select an input signal according to the

section “Selecting An Input Signal” of the

following page.

Power switch (OFF position)

1

Press the STANDBY/ON button.

The message “Power off?” will appear on

the screen for approximately 5 seconds.

Attached the lens cap.

2

Press the STANDBY/ON button again while

“Power off?” the message is visible.

The projector lamp will go off, and the

STANDBY/ON indicator will begin blanking orange.

Then the STANDBY/ON indicator will stop blinking

and light to solid orange when the lamp cooling is

complete.

3Switch the power switch to [O] (OFF).

The STANDBY/ON indicator will go off.

Turning Off The Power

1

4

VIDEO RGBSEARCH

MAGNIFY

ASPECT AUTOBLANK

VOLUME

PinP

STANDBY/ON

button

STANDBY/ON

STANDBY/ON button /

indicator

Contents

Main Page Projector User's Manual - Operating Guide Page Contents Part Names BG K F Projector Part Names (continued) Remote Control r 3 4 Setting Up 6 Setting Up Screen DC A B Page 8 Connecting Your Devices Plug-and-Play Capability A R/CR/PR G/Y B/CB/PB H V Examples of connection with a computer Audio out Stereo Mini cable AUDIO IN 2 D A E HI Examples of connection with a VCR/DVD Player H H J VCR/DVD Player Projector HI If using a s-video signal If using a component signal J K 1 Connecting The Power Supply 2 Remote Control 23 Putting Batteries 1 Remote Control (continued) Operating The Remote Control Power ON/OFF Turning On The Power Turning Off The Power 2 3 Operating Selecting An Input Signal Selecting The Aspect Ratio Using The Automatic Adjustment Feature Adjusting The Picture Position 2 4 3 Correcting The Keystone Distortion Adjusting The Volume Muting The Sound Temporarily Blanking The Screen Freezing The Screen Using The Magnify Feature Displaying The Child Window Selecting An Audio Input Multifunctional Settings 21 Multifunctional Settings Using The Menu Functions ex. Turning off the built-in speaker MAIN Menu With the MAIN menu, the items shown in the table below can be PICTURE-1 Menu 24 PICTURE-1 Menu (continued) PICTURE-2 Menu INPUT Menu With the INPUT menu, the items shown in the table below can be 27 INPUT Menu (continued) AUTO Menu With the AUTO menu, the items shown in the table below can be 29 AUTO Menu (continued) SCREEN Menu With the SCREEN menu, the items shown in the table below can be 31 SCREEN Menu (continued) OPTION Menu With the OPTION menu, the items shown in the table below can be 33 OPTION Menu (continued) Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE Lamp (continued) 35 Lamp (continued) Replacing The Lamp 4 5 6 Air Filter Caring For The Air Filter 4 Page Troubleshooting roubleshooting Related Messages 39 Related Messages (continued) Regarding The Indicator Lamps 41 Regarding The Indicator Lamps (continued) Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. The cooling fan is not operating. There is a possibility that the interior portion has become heated. Phenomena That May Easily Be Mistaken For Machine Defects 43 Phenomena That May Easily Be Mistaken For Machine Defects (continued) W Warranty And After-Service This specifications are subject to change without notice. 44 arranty And After-Service Specifications TECHNICAL Example Of Computer Signal 46 Initial Set Signals Connection To The Ports o The Ports A ARGB BRGB OUT Connection To The Ports (continued) o The Ports (continued) IVIDEO IN KCOMPONENT (CR/PR, CB/PB, Y) L J I Connection To The Ports (continued) 50 o The Ports (continued) following page. CONTROL port RS-232C Communication 51 RS-232C Communication Connecting The Cable 19200bps, 8N1 1. Protocol 2. Header 3. Command data Page Command Data Chart (This table is