28
Multifunctional Settings (continued)
Multifunctional Settings (continued)
AUTO Menu

With the AUTO menu, the items shown in the table below can be

performed. Perform each operation in accordance with the
instructions in the table below.
Item Description
ADJUST
Pressing the (or the ENTER) button performs the automatic adjustment.
■At a RGB signal
The vertical position (V POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically
adjusted. And the aspect ratio (ASPECT) will be automatically selected.
memoMake sure that the application window is set to its maximum size prior to
attempting to use this feature. Dark pictures may still be incorrectly adjusted.
Use a bright screen when adjusting.
■At a video signal or s-video signal
The signal type mode best suited for the respective input signal and the
aspect ratio (ASPECT) will be selected automatically. And the vertical
position (V POSITION), the horizontal position (H POSITION) will be
automatically adjusted.
■At a component video signal
The vertical position (V POSITION), the horizontal position (H POSITION) and
the clock phase (H PHASE) will be automatically adjusted. And the aspect
ratio (ASPECT) will be automatically selected.
memoThis function is available only when the AUTO is selected to the item
“VIDEO” of the INPUT menu. For a component video signal, the signal type is
identified automatically independently of this function.
memoThis operation requires approximately 10 seconds, and the message
“AUTO IN PROGRESS” is displayed during the operation.
memoThis operation may not work well at some signals. If the picture
becomes unstable (ex. a irregular picture, a color lack), please select the
suitable mode to the item “VIDEO” of the INPUT menu.
POWER OFF
Set the time using the / buttons. :
Long (max. 99 minutes) Short (min. 0 minute = DISABLE)
ex.
When the time is set to 1 to 99, the projector lamp will go off and the
STANDBY/ON indicator begins blinking when the passed time with a proper
signal (without no-signal and an unsuitable signal) reaches at the set time.
Please refer to the section “Turning Off The Power”.
POWER ON
Select the TURN ON or the TURN OFF using the / buttons.:
TURN ON TURN OFF
When the TURN ON is selected, you can turn the projector on without pressing
the STANDBY/ON button. Please refer to the section “Turning Off The Power”.
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
ADJUST
POWER OFF
POWER ON
SEARCH
RESET
0 min
TURN ON
TURN ON
(This table is continued to the following page.)
AUTO
POWER OFF
ENABLE
1min
AUTO
POWER OFF
DISABLE
0min