To connect SCART output (RGB)
Before connections: An exclusive SCART adapter
NOTE:
•Audio signal is not available for this connection.
•The RGB IN 2 connector does not support Plug & Play.
Video equipment | Projector |
such as DVD player |
|
| RGB 1 IN |
| To RGB IN 1 |
Commercially available Female |
|
SCART cable |
|
1.Turn off the power to the projector and your video equipment.
2.Use the
able SCART cable to connect the RGB 1 input of your projector and a SCART output (RGB) of your video equipment.
3.Turn on the power to the projector and your video equipment.
4.Use the RGB 1 button on the remote control to select the RGB 1 input.
5.Press the MENU button on the remote control to display the menu.
6.From the Advanced menu, select [Projector Options] → [Setup] → [Page 3] → [Signal Select RGB1] → [Scart].
SCART is a standard European
NOTE: The
Connecting an External Monitor
RGB OUT
LINE IN
PHONE
You can connect a separate, external monitor to your projector to simul- taneously view on a monitor the RGB analog image you're projecting. To do so:
1.Turn off the power to your projector, monitor and computer.
2.Use a
3.Turn on the projector, monitor and the computer.
NOTE:
•The RGB OUT connector outputs RGB signal during idle mode (See page E- 47). When the projector goes into idle mode, the image on an external moni- tor disappears for a moment. Note that the RGB OUT connector will not out- put RGB signal during Standby mode.
•When the projector is in the Idle mode, the image may not be correctly dis- played while the cooling fans are running immediately after turning on or off the power. Note that the RGB OUT connector will not output RGB signal dur- ing Standby mode.
•Daisy chain connection is not possible.
