English - 12
Speaker
Use VGA cable to connect VGA IN conn ector on 445 to the VGA OUT connector on the computer
Using the USB Cable
Connect to USB port then install the sup plied queue program.
Using the EXTENDER adapter and RS232 Cable to connect EXTEND ER of 445 to a RS232 of computer
Connecting to speaker
<Remark>: Or connect to an addition al amplifier before connecting to the speaker.
4.4 Start using the 445
Control Panel
Remote Control
When using the remote control, aim at the receptor on the DC265, and press the power button.
Once DC265 is turned on, the LED on the control panel will flash a few times and stay lit. Please contact your
distributor if the LED is not on.
<Note> Once the password page is shown, please key in the pa ssword.
If you forget it, please contact your distributor or the service cente r.