English - 24
This function enables visual presente r to automatically clear image noise. The noise is especially obvious whe n Visual
presenter is connected to a DLP projec tor. You can use this function to improve the image quality.
1. Press [Menu] on the remote control or cont rol panel to enter the setting menu.
2. Press []or [] to the [Setting].
3. Press [] to find [Noise Reduction].
4. Press []or [] to select [On].
7.18 I would like to set / change the password (Lock Down) 7.18.1 Setting the password
1. Press [Menu] on the control panel to enter the setting menu.
2. Press []or [] to the [Advance] menu.
3. Press []to [Lock Down].
4. Press []or [] to select [On].
5. The screen will be display ed, as shown below.
6. Key in the password
Press the keys on the control panel. All keys can be used as part of the password except the [Power] and [Enter]
keys. The maximum number of charac ters is 2. For example, you can press [ Source] + [Menu] as the
password.
<Remark>The screen will show * w hile you enter the password. Ensure t hat you remember the order in
which the keys are entered.
7. After completing the passw ord, press [Enter].
8. The confirmation screen will be displayed, as shown below. E nter the password again.
9. After you enter the pass word, press [Enter].
If the password is entered correctly, se tup is completed. If the password is inc orrect, an error message is
displayed and please follows the screen instructions.
7.18.2 Changing the password
1. Press [Menu] on the control panel to enter the setting menu.
2. Press []or [] to the [Advance] menu.
3. Press []to [Lock Down]
4. Press []or [] to select [Off] and deactivate the password setting function.
5. Press []or [] to select [On] and reactivate the password setting function. Refer to Steps 5-8 in 445 7.18 I
would like to set / change the pass word for operational steps.
Key in Password
Confirm password