VIDEO CASSETTE

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

PRECAUTIONS

Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

Avoid extreme heat, high humidity and magnetic fields.

Do not tamper with the cassette mechanism.

Do not touch the tape with your fingers.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

CORRECTWRONG

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play).

The table below shows the maximum recording/play- back time using T60, T120 or T160 tapes in each mode.

Tape Speed

Recording/Playback Time

 

 

 

 

 

 

Type of tape

T60

T120

T160

 

 

 

 

 

SP mode

1 hour

2 hours

2-2/3 hours

 

 

 

 

 

SLP mode

3 hours

6 hours

8 hours

 

 

 

 

 

Note: You can play back a tape recorded in LP mode (Long Play).

REMOVING A CASSETTE

1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/VCR. The cassette will eject.

2)Pull the cassette out of the cassette compartment. 3)Store the cassette in its case as shown.

ERASE PREVENTION

You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.

Tab

If you decide to record on the tape again, cover the hole with plastic tape.

Plastic Tape

- 7 -

EN

9I03

Page 7
Image 7
Durabrand DCC1303, DCC1903 owner manual Video Cassette