C A S E M E N T O R S L I D I N G W I N D O W S
•Remove the four “shoulder screws” sup- plied from the hard- ware packet.
•Screw two of the four shoulder screws into the holes on the bottom back of the fan and two into the holes on the bottom front of the fan.
•Remove the mounting bracket from the kit provided.
•Temporarily hook the mounting bracket over the four screws to hold the bracket in place (Fig. 3).
•Choose a suitable mounting location on the window frame
where the fan can be positioned to direct air- flow through the open window. Mark the loca- tion of the bracket with a pencil for placement. NOTE: Since the mount - ing bracket will remain attached to the window frame at the marked location, be sure that the bracket is posi - tioned in a manner that will allow the window to be closed when the fan is removed.
•Unhook the bracket from the fan. Using the long wood screws pro- vided in the hardware packet, mount the bracket into the frame at the marked location (Fig 4). The fan can be
mounted onto the bracket within the win- dow and is ready for use (Fig. 5).
•In rare instances dur- ing CASEMENT win- dow installation, your window screen may not fit in its original posi- tion. In that event, it may be necessary to use an “alternate brack- et” which will be pro- vided free of charge. This alternate bracket will enable you to use your window screen in its original position. Please refer to the PARTS AVAILABLE sec- tion of this instruction manual.
FIG. 3 | FIG. 4 | FIG. 5 |
|
|
|
