Dymo 3000 Cleaning Your Printer, To clean the cutter blade, To clean the print head

Cleaning Your Printer

Your printer is designed to give you long and trouble-free service, while requiring very little maintenance.

Clean your printer from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette.

To clean the cutter blade

1.Remove the label cassette.

2.Place the tip of a ball-point pen or pencil on the L-shaped piece as shown in Figure 13, and press the piece down.

Press and hold cutter lever

Press down and hold

Figure 13

3.While holding the L-shaped piece down, press and hold the cutter lever to expose the cutter blade.

4.Use a cotton ball and alcohol to clean both sides of the blade.

5.Release the cutter lever.

To clean the print head

♦Clean the print head using the cleaning tool located inside the tape compartment lid.

You can also use the optional cleaning pen to clean the cutter blade and print head.

12