About Your New Label Maker
With your new DYMO LabelManager® 350D label maker, you can create a wide variety of
Visit www.dymo.com for information on obtaining tapes and accessories for your label maker.
Warranty Registration
Please complete the warranty registration card and return it to the appropriate customer service address within seven days of purchase. Visit www.dymo.com for details.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker operates on battery power or with an optional AC power adapter. To save power, the label maker will automatically turn off after two minutes of inactivity.
Inserting the Batteries
The label maker uses six AA batteries.
To insert the batteries1.Remove the battery compartment cover. See Figure 2.
Figure 2
2.Insert the batteries following the polarity markings (+ and –).
3.Replace the battery compartment cover.
xRemove the batteries if the label maker will not be used for a long period of time.
Connecting the Power Adapter
An optional AC power adapter can also be used to power the label maker. Connecting the power adapter to the label maker disconnects the batteries as a power source.
To connect the power adapter1.Plug the power adapter into the power connector on the top, left side of the label maker.
2.Plug the other end of the power adapter into a power outlet.
Inserting the Tape Cassette
Your label maker comes with one D1 tape cassette. Visit www.dymo.com for information about purchasing additional tape cassettes.
To insert the tape cassette1.Press and release the tape cassette cover to open the tape compartment. See Figure 3.
5
