Figure 8
Refer to the LabelMANAGER 450 Quick Start Card for installation instructions and the DYMO Label Software User Guide for information about designing and printing labels.
Formatting Your Label
You can choose from a number of formatting options to enhance the appearance of your labels.
The labelmaker remembers the last feature selection made so that each time you enter one of the feature menus described in this section, you are positioned at the last item selected from that menu.
Changing the Font
Seven fonts are available for your labels:
Arial Narrow
Arial Normal 
Arial Wide BIG
Times New Roman
When you specify a font, that font applies to all characters on the label.
To set the font
1.Press the 
key.
2.Use the arrow keys to move to the desired font and then press 
.
Adding Font Styles
You can choose from six different font styles to apply to your text:
Normal
Bold
Italic
Outline
Shadow
3D
Vertical
Mirror
Italic + Bold
Italic + Outline
Italic + Shadow
Italic + 3D
Only one style can be used at a time. Styles can be used with alphanumeric characters and symbols.
See Using Symbols and Special Characters on page 9 for more information on printing symbols.
To set the font style
1.Press the 
key.
2.Use the arrow keys to move to the desired style and then press 
.
Adding Box and Background Styles
You can further highlight your text by choosing a box, underline, or background style. You can also use label text stored in memory as background text on your label.
A label can be underlined or enclosed in a box or background, but not both together. The styles available are shown in Figure 9.
7
