3. Connecting your LabelWriter Printer
NOTE Do not connect the printer to your computer until instructed to do so during the software installation.
To connect the power
1Plug the power cord into the power adapter. See Figure 4.
Power cord
Power adapter
Figure 4
2Plug the power adapter into the power connector on the bottom of the printer. See Figure 5.
3 | Plug the other end of the power cord into a | USB |
| ||
| power outlet. |
|
4 | Plug the USB cable into the USB port on the | Cable |
| bottom of the printer. See Figure 5. | channel |
|
|
5Insert the power and USB cables through the cable channel and set the printer down.
NOTE DO NOT CONNECT the other end of the USB cable to your computer until asked to do so during the software installation.
6When prompted by the software installer, plug the USB cable into a USB port.
PAGE 5 OF 10
Power
USB 24VDC
Figure 5
Figure 6
0808