4. Loading Labels

To load a label roll

1Press the form-feed button to eject the labels that protected the printer during shipment.

2Open the top cover and remove any packing material inside the label compartment.

SpoolSpool

spindleguide

3

Remove the label spool from inside the cover.

Figure 7

 

4

Hold the spool spindle in your left hand and place the

 

 

label roll on the spindle so that the labels feed from

 

 

underneath and the left edge of the label roll is flush

 

 

against the side of the spool. See Figure 7.

 

5

Place the spool guide onto the right side of the spool

Figure 8

 

and press the guide tightly against the side of the

 

 

label roll, leaving no gap between the roll and the spool. See Figure 8.

 

NOTE The label roll must fit snugly against both sides of the

 

 

label spool, with no gaps, to avoid drifting as the labels feed

 

 

through the printer.

 

6

Insert the label spool into the slot in the printer cover with

 

 

the labels extending from underneath the roll. See Figure 9.

Figure 9

H-1265

PAGE 6 OF 10

0808 IH-1265