2. Installing the Software

NOTE Do not connect the printer to your computer until instructed to do so during the software installation.

To install the software on a Windows system

1Insert the LabelWriter CD into your CD-ROM drive. After a few seconds, the installation screen appears.

If the installation screen does not appear:

a.Click Start, then Run on the Windows taskbar. The Run dialog box appears.

b.Enter D:\install.exe (where D is the letter assigned to the CD-ROM drive) and click OK.

2Click Install and follow the instructions in the installer.

To install the software on a Mac OS system

1Insert the DYMO LabelWriter CD into the CD-ROM drive.

After a few seconds, the DYMO Label Software Installer icon appears. See Figure 3.

2Double-click the Installer icon and follow the instructions.

DYMO Label

Figure 3

If you do not see your printer in the printer list when the installation is complete, refer to the ReadMe file for instructions on how to add the printer.

H-1266

PAGE 4 OF 10

0808 IH-1266