3. Connecting your LabelWriter Printer
NOTE Do not connect the printer to your computer until instructed to do so during the software installation.
To connect the cables
1Plug the power cord into the power adapter. See Figure 4.
2Plug the power adapter into the power connector on the bottom of the printer. See Figure 5.
3Plug the other end of the power cord into a power outlet.
4Plug the USB cable into the USB port on the bottom of the printer. See Figure 5.
5Insert the power and USB cables through the cable channels and set the printer down.
Power Adapter
Power Cord
Figure 4
USB 
Power
Cable
channels Figure 5
NOTE DO NOT CONNECT the other end of the USB cable to your computer until asked to do so during the software installation.
6 When prompted by the software installer, plug the USB cable into a USB port.
Figure 6
PAGE 5 OF 10 | 0808 |