Applying Self-Adhesive Labels | Dymo M1011 instruction

Applying Self-Adhesive Labels

Self-adhesive plastic and aluminum labels stick permanently to any smooth, clean, and dry surface.

To apply self-adhesive labels

1.Peel off the protective backing taking care not to touch the adhesive.

2.Press the label in place.

3.Apply firm pressure along the entire length to ensure good contact.

11

Image 11

Dymo M1011 manual Applying Self-Adhesive Labels, To apply self-adhesive labels

Contents

User Guide Page About Your New Labelmaker To load the tape roll Loading the Label Tape To cut the tape Cutting the Tape To add space between words Embossing the LabelTo emboss a label Embossing on Stainless Steel Tape To adjust for stainless steel tape To retract the tape Retracting the Tape To remove the tape Removing the Tape To center the text on a short label Centering the Text on the LabelTo center the text on a long label To apply self-adhesive labels Applying Self-Adhesive Labels To punch a cable tie slot Punching Holes in Non-Adhesive LabelsTo punch a hole To change the wheel Changing the Wheel Hints for Trouble Free Operation Contacting Customer Support Warranty Registration