Dynacord LX2200, LX1600, LX3000 manual Safety Package

SWITCHMODE PRECISION SERIES

ultra light weight power amplifiers

FRONT

The dB-calibrated level controls are implemented as ultra-precise detent potentiometers that are recessed in the front panel to pro- tect them from accidental contact. Power, Protect, Signal and Limit LEDs provide a quick overview of the operating status.

REAR

The electronically balanced XLR IN / OUT sockets are provided for direct operation with professional mixing consoles and signal processors. All the models in the LX series are designed for a Constant Gain of 32 dB. The power outputs for Channels A and B are on Speakon connectors. AGround Lift switch is also provi- ded to separate the chassis ground from the signal ground in order to eliminate ground loop hum.

LX1600

With an output rated at 2 x 1300 watts into 2 ohms and 2 x 800 watts into 4 ohms, this is the ideal power amplifier for small to medium-sized full-range cabinets and MF/HF components in active multi- way systems.

LX2200

With a stable output of 2 x 1600 watts into 2 ohms and 2 x 1100 watts into 4 ohms, this is the ideal amplifier for professional multi-way components as well as medium- sized subwoofers in concert sound systems.

LX3000

The new flagship of the LX series delivers a mighty 2 x 2100 watts into 2 ohms and 2 x 1500 watts into 4 ohms and therefore has plenty of headroom for large subwoofer arrays.

SAFETY PACKAGE

The complete LX series is equipped with protections against overheating, overloading, short-circuits, DC and HF as well as a Back-EMF protection. With the Soft Start system, the power out-

puts are switched on via a relay when a safe operational state has been reached and a power-up delay prevents the mains fuses being activated.