Instructions

Cleaning the glass cooktop.

Instructions Safety

Metal Marks and Scratches

Be careful not to slide pots and pans across your cooktop. It will leave metal markings on the cooktop surface.

These marks are removable using the cleaning cream with a scrub sponge and/or razor scraper.

If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave

black discoloration on the cooktop.

This should be removed immediately before heating again or the discoloration may be permanent.

WARNING: Carefully check the bottom of pans for roughness that would scratch the cooktop.

and Cleaning Operating

Cooktop Seal

To clean the cooktop seal around the edges of the glass, lay a wet cloth on it for a few minutes, then wipe clean with nonabrasive cleaners.

Glass surface – potential for permanent damage.

Care

Our testing shows that if you are cooking high sugar

Damage from Sugary Spills and Melted Plastic

Troubleshooting Tips

mixtures such as jelly or fudge and have a spillover, it can cause permanent damage to the glass surface unless the spillover is immediately removed.

Turn off all surface units. Remove hot pans.

Wearing an oven mitt:

a.Use the razor scraper to move the spill to a cool area on the cooktop.

b.Remove the spill with paper towels.

Any remaining spillover should be left until the surface of the cooktop has cooled.

Don’t use the surface units again until all of the residue has been completely removed.

NOTE: If pitting or indentation in the glass surface has already occurred, the cooktop glass will have to be replaced. In this case, service will be necessary.

Consumer Support

To Order Parts

To order Cerama Bryte® cream and the razor scraper, please call our toll-free number:

National Parts Center

800-626-2002.

Cerama Bryte® Cream . . . . . . .# WX10X300 Razor Scraper . . . . . . . . . . . . .# WX5X1614 Kit . . . . . . . . . . . . . . . . . . . . . .# WB64X5027 (Kit includes cream and razor scraper)

24

Page 24
Image 24
GE 164D4290P024 Instructions Safety, Metal Marks and Scratches, Cooktop Seal, Damage from Sugary Spills and Melted Plastic

49-80065, 164D4290P024 specifications

The GE 164D4290P024, 49-80065 is a sophisticated and efficient component widely utilized in many applications across various industries. Known for its reliability and performance, it has become a vital part of numerous systems, particularly in the aerospace and defense sectors. This component showcases a blend of advanced technologies and robust designs that set it apart in a competitive market.

One of the standout features of the GE 164D4290P024, 49-80065 is its durability. Designed to withstand extreme environmental conditions, this component is engineered to resist high temperatures, vibrations, and various levels of contamination. Such durability ensures that it can operate reliably in challenging settings, making it suitable for aerospace applications where performance is critical.

The technology employed in the GE 164D4290P024, 49-80065 includes the use of advanced materials that enhance its mechanical properties while reducing weight. Weight reduction is crucial in aerospace, where every ounce matters for fuel efficiency and overall performance. The use of innovative materials not only contributes to its lightweight characteristics but also helps improve its longevity and reliability.

Another significant characteristic of this component is its compatibility with various systems. The GE 164D4290P024, 49-80065 is designed to integrate seamlessly with existing infrastructure, allowing for straightforward installation and operation. Its versatility makes it a preferred choice among engineers who seek dependable solutions that can be adapted to multiple applications without extensive modifications.

In terms of performance, the GE 164D4290P024, 49-80065 delivers consistent results, which is crucial in mission-critical applications. It is engineered to meet stringent performance standards, ensuring that it operates effectively under demanding conditions. This reliability is supported by rigorous testing protocols that confirm its capabilities in various scenarios.

Moreover, the maintenance of the GE 164D4290P024, 49-80065 is designed to be straightforward, reducing downtime and maintenance costs. This ease of maintenance can significantly improve operational efficiency, helping organizations save time and money.

In conclusion, the GE 164D4290P024, 49-80065 is a high-performance component characterized by its durability, advanced technologies, and compatibility with various systems. Its reliability in extreme conditions, lightweight properties, and ease of maintenance make it an invaluable asset in aerospace and defense applications, contributing to enhanced operational efficiency and effectiveness in diverse settings.