Dynacord P 64 user manual Technical Specifications

Technical Specifications

Power Supply, Consumption	100 - 240 V AC, 50/60 Hz, 90 W max., (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1
	modules)
Audio Slots	4	(for AI-1, AO-1, MI-1, DI-1 and/or DO-1 modules)
Network Slots	1	(for CM-1 module)
Interfaces	Ethernet 10/100 MBit/s (1 x RJ-45)
	CAN Bus (2 x RJ-45)
	RS-232 (2 x 9pin D-Sub)
	USB (Type B, front)
GPIO Control Port	2 x 6-pole Euro block
	4	Control Inputs (analog 0-10 V / logic control)
	3	Control Outputs (Relay contact to ground)
	1	Fault Output (NC Relay contact)
	2	Reference Outputs (+10 V, 200 mA / GND)
Signal Processing	2	DSPs Standard (150 MHz, 300 MIPS)
	1	DSP per Audio Module (100 MHz, 100 MIPS)
	DSP-1 Extension Module optional (+300 MIPS)
	DSP-2 Extension Module optional (+1200 MIPS)
Sample Rate	48 kHz internal
	32 kHz - 192 kHz external
Data Format	24 Bit linear A/D conversion, 48 Bit processing
Operating Temperature Range	0	°C...40 °C
Dimensions (W x H x D)	483 x 88.1 x 381 mm (19”, 2 HU)
Weight	7.35 kg
Options
Analog Input Module	AI-1 (Part No.: D 170 324)
Microphone Input Module	MI-1 (Part No.: D 170 325)
Digital Input Module	DI-1 (Part No.: D 170 366)
Analog Output Module	AO-1 (Part No.: D 170 326)
Digital Output Module	DO-1 (Part No.: D 170 367)
CobraNet Module	CM-1 (Part No.: D 170 327)
DSP Extension Module	DSP-1 (Part No.: D 170 328)
	DSP-2 (Part No.: D 170 482)

GmbH • Hirschberger Ring 45 • 94315 Straubing • Telefon (09421) 706-0 • Telefax (09421) 706-265

Subject to change without prior notice. Printed in Germany V1.0 21.07.2008 D 368 198