Automatic water heater start:

When water temperature is 1˚F (0.5˚C) lower than the Set Point, the heater will automatically turn on until water temperature reaches Set Point plus 1˚F (0.5˚C).

The "Heater" indicator lights up when the heater is on. It flashes when there is a request for more heat but the heater has not yet started.

N.B.: If your system is configured in Low Current Mode, the heater will not start if a pump is on at high speed.

Economy mode:

Press Econo key to switch from Normal mode to Economy mode. In Economy mode, system maintains temperature at the desired Set Point during filter cycles only. Set Point is 20˚F (11˚C) below the Normal mode Set Point for the rest of the time. In Economy mode, the display will toggle between the current water temperature and the "Econ" message.

PROGRAMMING FILTER CYCLE DURATION

The system automatically performs two filter cycles per day, at 12-hour intervals. During a filter cycle: Pump 2 and blower run for one minute, then Pump 1 runs at low speed for the programmed number of hours

The "Filter Cycle" indicator lights up when the filter cycle is on. To set filter cycle duration:

Press and hold Filter key

Use Up or Down arrow keys

When the desired setting

until the display shows "xx",

to change setting.

is displayed, press Filter key

representing the currently

0 = no filtration

again to confirm. A filter cycle

set filter cycle duration in

12 = continuous filtration

starts immediately.

hours.

 

 

The filter cycle is suspended if the water temperature raises more than 2˚F (1˚C) above Set Point or if spa is in use (pumps, blower started manually). The "Filter" indicator will blink (on 0.5 second, off 0.5 second,

on 0.5 second, off 1.5 seconds).

N.B.: After a power failure, the filter cycle duration will return to its default value (2 hours). In this case, the first filter cycle will start one minute after power has been restored.

TROUBLESHOOTING

Pumps have started up for one minute on several occasions and "Filter Cycle" indicator is flashing.

3 flashing dots are displayed.

Water temperature is flashing.

Not a bug but a feature!

Our Smart Winter Mode protects your spa from the cold by automatically turning pumps on for one minute several times a day to prevent water from freezing in pipes.

A problem has been detected.

Do not enter the water! Check and open water valves. Clean filter if necessary. Check water level. Add water if needed.

Shut power off and power your spa up again to reset the system.

Call your dealer or service supplier if problem persists.

Water temperature in the spa has reached 112˚F (44˚C).

Do not enter the water! Allow water to cool down.

The system will reset automatically when water temperature reaches 109˚F (43˚C).

Call your dealer or service supplier if problem persists.

The display is flashing.

A power failure has occurred.

 

Press any key to reset the system, then reprogram all

 

desired parameters.

C L U SIVE•

Smart

Winter

Mode

9919-100495-B

Page 1
Page 2
Image 2
Dynasty Spas SC-MP-DY5 manual Programming Filter Cycle Duration, Troubleshooting, Until the display shows To change setting
Page 1

SC-MP-DY5 specifications

The Dynasty Spas SC-MP-DY5 is a premier hot tub that exemplifies luxury and relaxation, designed to enhance your outdoor experience. This model is particularly known for its spacious interior, providing ample room for friends and family to unwind together. With seating for up to five people, the SC-MP-DY5 is an ideal choice for both intimate gatherings and social occasions.

One of the standout features of the SC-MP-DY5 is its advanced hydrotherapy system. This hot tub is equipped with multiple strategically placed jets that deliver a soothing massage experience tailored to your needs. The adjustable jets allow users to customize the pressure and focus points of the water flow, ensuring a personalized therapy session. Whether you're looking to relieve muscle tension after a long day or simply relax in a serene environment, the hydrotherapy system in the SC-MP-DY5 is designed to meet those needs.

In addition to its comfort and therapeutic benefits, the SC-MP-DY5 also boasts several technological advancements. The spa features a state-of-the-art control panel that allows users to easily adjust temperature settings, jet functions, and lighting options. The efficient filtration system ensures clean and clear water, enhancing the overall spa experience while reducing maintenance efforts.

Energy efficiency is another key characteristic of the SC-MP-DY5. Designed with insulation and an Energy Star-certified heater, this hot tub aims to minimize energy consumption while optimizing heat retention. This means not only lower utility bills but also a commitment to sustainability.

The design of the SC-MP-DY5 is equally impressive, showcasing a sleek exterior and user-friendly entry points. The contemporary look can complement any outdoor space, while the high-quality materials provide durability against the elements. With various color options available, you can select a finish that perfectly matches your aesthetic.

Safety is a top priority with the SC-MP-DY5, featuring built-in steps and a locking cover to ensure secure usage while preventing unauthorized access. This ensures peace of mind for families and enhances the overall enjoyment of the spa.

In summary, the Dynasty Spas SC-MP-DY5 is a blend of luxury, technology, and safety features, making it a standout choice for anyone looking to enhance their outdoor relaxation experience. Its hydrotherapy capabilities, energy efficiency, and stylish design ensure it will be a valued addition to any backyard.
Top Page Image Contents