DVD +/- R/RW Writer

Rear View

1.Digital Audio Output Connector

If your sound card has a digital audio IEC958 format connector, you can connect it to this digital audio output connector with a 2-pin audio cable.

2.Analog Audio Output Connector

This connector allows you to connect the drive to your sound card with a 4- pin audio cable.

3.Device Configuration Jumper

Set the jumper to Master, Slave or Cable Select according to your system configuration.

4.IDE Interface Connector

Plug one end of the 40-pin IDE cable here to join the 40-pin IDE connector on the motherboard. The red-edge of the IDE cable must be connected to Pin 1 of each connector.

5.Power Supply Connector

By plugging the computer’s power supply cable here, you can connect the drive and your computer system.

8