DVD +/- R/RW Writer

Hardware Installation

1.Turn off the power to the computer system.

2.Disconnect all cables from the back of your computer, and then remove the cover from the computer.

3.Insert the writer into one of the vacant 5.25" drive bays and secure it with screws to your PC.

In order to prevent interference between the writer and the computer, please mount the writer using all four mounting screws.

4.Connect the 40-pin IDE cable from one of the IDE ports on the mainboard to the 40-pin connector of your writer. Also, connect the power supply cable to the back of the writer.

Make sure to align and connect the red-edge of the IDE Cable to Pin 1 on the drive.

5.If you have a sound card that can be connected to this writer, you can connect the drive (as Audio-out) and the sound card (as Audio-in) with a 4- pin audio cable.

4