Changing channel settings 23

DX-24L230A12/DX-32L220A12/DX-46L261A12
•MONO–if there is noise or static on weak
stereo broadcasts.
•STEREO–for programs broadcast in stereo.
•SAP–to listen to a secondary audio program
(if available).
•Reset Audio Settings— Resets all audio settings
to factory defaults.
4Press MENU to return to the previous menu, or press
EXIT to close the menu.

Playing TV audio only

You can turn off the picture on your TV and listen to the
program audio only.
To play TV audio only:
1Press MENU. The on-screen menu opens with the
Picture menu displayed.
2Press or to highlight Channels, then press .
The Channels menu opens.
3Press or to highlight Audio Only, then press
or to select On.
4Press EXIT to close the menu. After pressing EXIT,
the picture will turn off in approximately 5 to 10
seconds.
Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for
channels available in your viewing area and stores the
channel information in the channel list. When you press
CH+ or CH–, your TV goes to the next or previous channel
in the channel list and skips any channels that were not
stored in the list.
If the TV signal source changes, for example you change
from an outdoor antenna to cable TV (no box), you need
to scan for channels again.
To automatically scan for channels:
1Press MENU. The on-screen menu opens with the
Picture menu displayed.
2Press or to highlight Channels, then press .
The Channels menu opens with Auto Channel Scan
highlighted.
3Press or to select your signal type. You can
select:
•Antenna—Select this option if you use an
antenna. Your TV scans for analog (VHF and UHF)
and digital channels in your area.
•Cable—Select this option if you have cable TV
and do not have a cable TV box. Your TV scans for
analog and digital channels in your area.
•Cable/Satellite Box—Select this option if you
use a cable or satellite TV box. Your TV will not
scan for channels because the cable or satellite
TV box provides the channel information.
Note
You can also press MTS/SAP on the remote control
one or more times to select the audio mode.
Notes
• Audio only works only when the input source is
TV and your TV is receiving a broadcast signal.
• To exit audio only mode, press any button.
When you exit audio only mode, the Audio
Only option is automatically reset to Off.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Settings Channels
Custom
70
40
60
0
Sharpness 50
Backlight 30
Reset Picture Settings
Select
Move EXIT Exit
MENU Back
Adjust settings to affect picture quality.
Add/Skip Channels
Favorites
Auto Channel Scan Antenna
Picture Audio Settings Channels
Select
Move EXIT Exit
MENU Back
Play the audio with the picture turned off.
Off
On
Channel Label
Channel Strength
Auto Zoom
Audio Only
WGBH-SD
Note
You do not need to scan for channels unless the
available channels changed after you ran the Setup
Wizard. For more information, see “Turning on your
TV for the first time” on page18.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Settings Channels
Custom
70
40
60
0
Sharpness 50
Backlight 30
Reset Picture Settings
Select
Move EXIT Exit
MENU Back
Adjust settings to affect picture quality.
Add/Skip Channels
Favorites
Picture Audio Settings Channels
Select
Move EXIT Exit
MENU Back
Automatically search for channels, press ENTER key to submenu.
Off
Off
Channel Label
Channel Strength
Audio Only
Auto Zoom
Auto Channel Scan Antenna
WGBH-SD
DX-24L-32L-46L_11-0908_V2.book Page 23 Thursday, August 25, 2011 2:57 PM