4Installing the stand or wall-mount bracketDX-24L230A12/DX-32L220A12/DX-46L261A12
Installing the stand or wall-mount bracketInstalling the stand
To install the stand:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2Align the screw holes on the stand with the holes on
the bottom edge of the TV, then secure the stand
with the screws provided (t wo M5 x 8 mm screws for
the 24” TV, three M5 x 8 mm screws for the 32” TV,
and four M5 x 8 mm screws for the 46” TV ).
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2Remove the screws that secure the base to the
stand, then remove the base.
3Remove the screws what secure the stand column to
the TV, then remove the column.
4Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
DX-24L230A12 (24-inch TV)
Note
The appearance of the product in this User Guide
may differ from your actual product, and is for
explanatory purposes only.
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Note
You must pay attention to the direction of the stand.
The wide portion of the stand should go towards the
front of the TV.
Locators
Locating grooves
Stand
M5 x 8 mm screws
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
Note
The length of the wall-mount screws vary depen ding
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
Remove the screws
3.94 in. (100 mm)
3.94 in. (100 mm)
Wall mount br acket s
DX-24L-32L-46L_11-0908_V2.book Page 4 Thursday, August 25, 2011 2:57 PM