Installation Instructions
INSTALLING THE COOKTOP
1 INSTALLING THE JUNCTION BOX
Install an approved junction box where it will be easily reached through the front of the cabinet where the cooktop will be located. The cooktop
conduit is 58″ long.
Install junction box so |
| |
that it can be reached | *5″ | |
through the front of the | ||
Min. | ||
cabinet. | ||
| ||
| *7″ Max. when | |
| installing over | |
| GSM2100 | |
| Dishwasher |
IMPORTANT: The junction box must be located where it will allow considerable slack in the conduit for serviceability.
INSTALLATION OVER GSM2100 DISHWASHER
The center of the junction box should be 5″ to 7″ below the cooktop lip, so it does not interfere with the dishwasher, installation or operation.
Electrical connections must be made before placing the cooktop into the cutout.
3 ATTACH FOAM TAPE
Apply the foam tape around the outer edge of the glass. Do not overlap the foam tape.
Bottom of Cooktop
Foam Tape
Cooktop
Glass
4 LOCATE MOUNTING PARTS
Start one screw through the bracket and into the cooktop (both sides). Do not tighten. Turn the bracket inward to avoid interference when dropping the cooktop into the countertop.
2PROTECT SURFACE OF COOKTOP
Place a towel or tablecloth onto the countertop. Lay the cooktop upside down onto the protected surface.
Bottom of Cooktop
Cloth under Cooktop
17
