62 | Installing Hard Disks | AXIS 2460 User’s Manual |
Appendix F - Installing Hard Disks
The AXIS 2460 can be fitted with various brands of commercially available IDE hard disk. For more information about recommended brands, please visit www.axis.com and see the product pages for the AXIS 2460.
Follow these instructions to install a disk:
1.Switch off power to the unit. First press the power button on the front panel until it turns amber and wait until the unit shuts down. Then set the main power switch on the rear panel to 0.
2.Mount the disk(s) in the holder(s).
3.Set the disk in the upper position to master. If installing a second disk on the same cable (channel) set this to slave. Exactly how this is done varies from one type of disk to another. Refer to the documentation provided with the disk.
4.Remove the cover from the AXIS 2460. Connect the
Connection for IDE Channel A
Set upper disk to Master.
Fasten with screws here
Connection for
IDE Channel B
5.Connect the power cable to the disk(s).
6.Screw the disk holders in place inside the unit, using 2 screws on each side. Use a magnetic screwdriver.