AXIS 2460 User’s Manual | System Options | 47 |
Deleting and Modifying the Properties for Allowed IP Addresses
To delete an IP address, select it in the list and click the Delete button. To modify an IP address, select it from the list of allowed addresses, make the necessary changes and then click the Save button.
Maintenance
This section provides tools for the following:
•Restart - This will restart the DVR.
•Clean - Erases ALL recordings and formats ALL of the hard disks.
•Restore - Erases and formats all disks and resets the DVR to its factory default settings. See also the description of how to reset to the factory default settings on page 49.
Maintenance - Advanced
The advanced maintenance function provides tools for maintaining the installed disks. The information and tools for each disk are as follows:
Model - Shows the brand of disk and the bus it is mounted on.
Status - The disk's current status is shown as follows:
Signifies that the disk is connected and being used by the DVR to store images.
The disk is connected, but is not currently being used to store images, probably due to a corrupt file system. Run error checking or format the disk before attempting to use it.
The drive cannot be used as it is either being formatted or having its file system checked.
ERROR The disk has errors and is no longer in use. Check the log files for detailed error information.
Size - The total disk capacity, shown in Gigabytes.
Error Checking - Click the Check button to check the disk for errors. No recordings can be made on this disk whilst error checking is in progress. If other healthy disks are present, then any recording will continue on those disks instead.
Formatting - Click the Format button to format a single disk. If all the disks need to be formatted, use the Clean function on the Maintenance page.
