AXIS 2460 User’s Manual | Setting up Events and Alarms | 25 |
Note that this is the desired frame rate. The actual frame rate will depend on the number of enabled cameras and if these cameras are synchronized or not. When using more than one camera, the frame rate for each camera can be calculated by dividing the frame rate for 1 camera by the number of cameras used. The table shown above features examples of the theoretical frame rates for 1 and 4 cameras, using synchronized cameras. To get the frame rates for 2 or 3 cameras, divide the frequency for 1 camera by 2 or 3, respectively.
Record from Camera - Select the cameras that the event will record from. The event can record on all 4 cameras if necessary. Note that using e.g. 2 cameras will create 2 recordings each time the event is activated.
Time Period Settings
This section will only be displayed if the Event Type is set as During Time Period or as Alarm Triggered During Time Period. To configure, specify the days of the week the event will be active, by checking the appropriate boxes. Set the start time and stop time in the fields provided. Please note that these settings will be valid every week until the event is changed or disabled.
Recording will begin at the Start Time and will continue up to and including the Stop Time on the days selected. For example, recording from 08:00 until 08:00 will produce a 1 minute recording, and recording from 08:00 until 08:59 will produce a 60 minute recording.
Events must be set to start and stop on the same day, It is not possible in a single event to record from e.g. 18:00 to 06:00 on the following day. If this type of configuration is required, two separate events must be used, one from 18:00 until 23:59 on the first day and the other from 00:00 until 5:59 for the following day.
Alarm Input Settings
This section will only be displayed if the Event Type is set as When Alarm is Triggered or Alarm Triggered During Time Period. Specify for each configured and enabled alarm how and when the event should react to the alarms.
Note: Before the event will record, the conditions for ALL of the configured alarm inputs 
must first be met. Unless a Recording Duration has been specified, recording will stop as soon as any of these conditions ceases to be valid.
The options for how the events will react are:
•Active - the event will react to the alarm when it has been triggered.
•Inactive - this alarm input must be inactive, that is, it must not have been triggered.
•
