Axisoft Tech manual Installing the Axis 2460 Network DVR

AXIS 2460 User’s Manual Installing the AXIS 2460 Network DVR 13

Using the appropriate method for your operating system, assign your product with a unique IP address (do not use the example below) from a computer on your network, as follows:

Windows - Start a command prompt and type these commands:	UNIX - Type these commands in your command line:
Syntax:	Syntax:

arp -s <IP address> <Ethernet address> <my PC IP address> ping -t <IP address>

Example:

arp -s <IP address> <Ethernet address> temp ping <IP address>

Example:

arp -s 123.123.123.123 00-40-8c-10-00-86 123.123.123.122	arp -s 123.123.123.123 00:40:8c:10:00:86 temp
ping -t 123.123.123.123	ping 123.123.123.123

Note: On some UNIX systems, the arp command can be located in a directory that is not on the command path.

You will now see ‘Request timed out...’ messages repeatedly returned in the command window.

❺Now turn the main power switch on the rear panel to I.

❻After approximately 30-40 seconds, the message ‘Reply from 123.123.123.123..’ or similar, is returned within the prompt window. Check that the Power Indicator is permanently lit and that the Network Indicator flashes intermittently.

❼Exit Ping. The IP address has now been set and you are ready to access the AXIS 2460 from your browser, as described below.