14 Dynex 48" LED TVDX-48D510NA15
www.dynexproducts.com
Component video (better)
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR video jacks on the back of your T V and the
component video out jacks on the cable or satellite box.
4Connect an audio cable (not provided) to the AUDIOL and R jacks on the back of your TV and to the audio out jacks on
the cable or satellite TV box.
5Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6Press INPUT to open the INPUT SOURCE list.
7Press or to highlight Comp/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The VIDEO/Y, PB, and PR video jacks (used to connect a
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect an AV device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
Audio cable
Cable or
satellite box
Component video cable
Back of TV
Component
video cable
connectors
Audio cable
connector
Analog
audio jacks
Component
video jacks
On your TV