16 Dynex 48" LED TVDX-48D510NA15
www.dynexproducts.com
Coaxial (good)
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a coaxial cable (not provided) to the ANT/CABLE jack on the back of your TV and to the antenna or cable TV
wall jack.
4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press or to highlight TV, then press ENTER.
7If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on page 55.
Notes
• Use a coaxial cable to eliminate interference and noise from
radio waves.
• Do not bundle the coaxial cable with the power cord or other
cables.
Cable or
satellite box
Coaxial cable
Back of TV
Coaxial cable
connector
ANT/CABLE
jack
On your TV