Dynex 50" LED TV 13
DX-50D510NA15
www.dynexproducts.com
DVI (same as HDMI but requires an audio connection)
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to
the DVI OUT jack on the cable or satellite box.
4Connect the other end of the cable to the HDMI1/DVI jack on the side of your TV.
5Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AU DIO OUT jac ks
on the cable or satellite box.
6Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7Press INPUT to open the INPUT SOURCE list.
8Press or to highlight HDMI1, then press ENTER.
Notes
You must use the HDMI1/DVI jack to connect a cable or satellite
box using DVI. If you use another HDMI jack, you will not hear
sound from the TV speakers.
Note
When you connect the audio using the PC/DVIAUDIO IN jack, the
audio output is analog.
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
Side of TV
HDMI cable
connector
HDMI1/DVI
jack
On your TV
Audio cable
connector
PC/DVI
AUDIO IN
jack
Audio cable
Back of TV