Dynex 50" LED TV 19
DX-50D510NA15
www.dynexproducts.com
Component video (better)
1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR jacks on the back of your TV and to the
COMPONENT OUT jacks on the component video device.
3Connect an audio cable (not provided) to the AUDIOL and R jacks on the back of your TV and to the L/R AUDIO OUT
jacks on the DVD or Blu-ray player.
4Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
5Press INPUT to open the INPUT SOURCE list.
6Press or to select COMP/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The VIDEO/Y, PB, and PR video jacks (used to connect a
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
Back of TV
Audio
cable
Component video
cable
DVD or Blu-ray player
Component
video cable
connectors
Audio cable
connectors
Component
video jacks
Analog
audio jacks
On your TV