18

Setting up your wireless card

To set up WPA2-PSK (no server):

Note: Choose this setting if your network does not use a radius server. WPA2-PSK (no server) is typically used in home and small office networking.

1Select WPA-PSKor WPA2-PSK (no server) from the Network Authentication menu on the Wireless Network Properties tab on the Edit information for a network page.

2Select TKIP or AES from the list.

3Enter your network key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients (network cards) that you want to include in your network.

4Click Save to finish. You must now set all clients (network cards) to match these settings.

Wireless networking utility options

The Options tab on the Wireless Networking Utility (WNU) lets you customize WNU settings.