Dynex DX-BPDVD7 Playing video and audio discs, Turning on the player, Playing discs, Pausing discs, Removing discs from the player, Using with headphones

7" Portable DVD Player	11
Playing video and audio discs

Turning on the player

To turn on the player:

1Open the LCD screen.

2Turn on the player. The power LED lights green and the LCD screen turns on.

Playing discs

To load and play a disc:

1Press the OPEN button to open the disc tray.

2Hold the edges of the disc and place the disc in the center of the tray with the label side up.

3Press the OPEN button to close the disc tray. The player starts playing the disc.

4 Turn the VOLUME knob to adjust volume (even when using headphones).

If the player is connected to a TV or an amplifier, adjust the volume on the connected device.

5Stop playback by pressing the STOP button on the player or remote control.

Pausing discs

To pause a disc:

1When playing a disc, press (play/pause) to pause playback.

2 Press (play/pause) again to resume playback.

Removing discs from the player

To remove a disc from the player:

1Press the OPEN button to open the disc tray, then remove the disc.

2Press the area on the DVD disc tray marked CLOSE to close the disc tray, then turn off the player.

Using with headphones

You can also use the player with headphones (optional) by plugging the headphones into the headphone jack on the left side of the player. Plugging headphones into the headphone jack disables the internal speakers.

Warning: To avoid damaging your hearing, set the volume to a low level before putting on the headphones, then adjust the volume up to a comfortable level.