7" Portable DVD Player | 23 |
No forward or reverse scan
•Some discs have sections that prohibit rapid scanning or title and chapter skip.
•You cannot advance through the opening credits and warning information at the beginning of movies because the disc is programmed to prohibit that action.
Bad sound quality
•Make sure that the audio output mode is set correctly.
•Make sure that the audio connection between the player and amplifier is correct.
Disc cannot be played
•Make sure that a disc is in the player.
•Make sure that the disc is placed on the disc tray correctly, with the label side up.
•Make sure you are using the correct type of disc (digital video discs, audio CDs, or MP3s).
•Both the player and disc are coded by region. If the region codes do not match, the disc cannot be played. This player is coded for Region 1 discs.
Remote control does not work
•Remove obstructions between the remote control and the player.
•Point the remote control at the remote control sensor of the player.
•Replace the battery with new ones.
To replace the battery:
1While pushing in on the tab as shown in the following graphic, pull the battery tray out of the remote control.
CR2025
Open
Push
2Remove the old battery, then insert a new battery with the + sign on the battery facing up.
3Push the battery tray back into the remote control.
Disc play starts, then stops immediately
•Both the player and disc are coded by region. If the region codes do not match, the disc cannot be played. This player is coded for Region 1 discs.
•The disc is dirty. Clean it.
•Condensation has formed in the player. Let the player dry out, then try again.
Picture is distorted
•Inspect the disc because it might be damaged. Try another disc.
•It is normal for some distortion to appear during forward or reverse scan.
No power
• If running on AC power: