Understanding card slot compatibility
CF, UDMA, MD
Insert Compact Flash™ (CF) type I/II, UDMA, or IBM® Microdrive cards into this slot.
SD, SDHC, MMC, and xD
Insert Secure Digital (SD or SDHC), MultiMediaCards (MMC or MMCplus), and xD picture cards into this slot. Note: An adapter is required for MiniSD and
MS Pro HG, MS Pro Duo, and
MS Pro
Insert Memory Stick PRO HG Duo,
Memory Stick PRO Duo, Memory
Stick Duo, Memory Stick PRO, or
Memory Stick cards into this slot.
Micro SD or M2
Insert Micro SDHC, Micro SD, or M2 cards into this slot. No adapter is required.
Note: The Micro SD slot shares a signal bus with the SD/MMC slot, so you cannot use both slots at the same time.
The M2 slot shares a signal bus with the MS slot, so you cannot use both slots at the same time.
Customizing drive icons
To make the media card slots easier to recognize in My Computer or
Windows Explorer, you can customize the drive icons.
To customize the drive icons in Windows:
1Save all files and close all programs.
2Insert the included utility CD into the CD/DVD drive. The driver home page opens automatically.
3Click Install Driver for Windows.
4Click Next, then follow the
Legal notices
FCC statement
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more or the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
One-Year Limited Warranty
Visit www.dynexproducts.com for details.
© 2010 BBY Solutions, Inc. All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.