12

DX-CRDRD

Troubleshooting

Problem

Suggestions

 

 

Memory card does not appear in

• Make sure the card reader has been properly connected to a USB

My Computer or Windows

connector on your computer’s system board.

Explorer.

• Try a different memory card of the same type in the same slot. If the

 

different memory card works, the card reader is functioning and the

 

original memory card is damaged or defective and should be replaced.

 

• Shine a flashlight into the empty card slots. Look to see if any of the pins

 

inside the slots are bent. If so, turn off and unplug your computer, then

 

straighten bent pins with the tip of a mechanical pencil or safety pin.

 

Replace the memory card reader if a pin has been bent to the point of

 

touching another pin.

Memory card appears in My

• Make sure the memory card is fully inserted into the appropriate card slot

Computer but errors occur when

on the reader.

writing or reading data.

• Try a different memory card of the same type in the same slot. If the

 

different memory card works, the card reader is functioning and the

 

original memory card is damaged or defective and should be replaced.

 

• Some cards have a read/write security switch on them. Make sure that

 

this switch is not in the lock position before attempting to write data to

 

the card.

 

• Make sure that the amount of data you are attempting to write to the

 

card does not exceed the amount of available free space on the card.

 

• Inspect the ends of the memory card for dirt and dust, which may be

 

covering a metal contact. Clean the contacts with a lint-free cloth and

 

small amounts of isopropyl alcohol. Replace the memory card if

 

necessary.

 

• If errors persist, replace the memory card.

Specifications

Chipset

GL 826

Memory card slots (4)

CF UDMA/MD slot

 

SDHC/SD/MMC/xD slot

 

MS Pro HG/MS Pro Duo/MS Pro slot

 

MicroSD/M2 slot

LED indicators

Card detect and data activity

Interface

USB 5-pin connector that connects to a system board USB connector

Operating temperature

32°F~104°F (0°C~40°C)

Storage temperature

-4°F~140°F (-20°C~60°C)

Cable length

19.7 inches (50 cm)

Dimensions (L*W*H)

4.02 × 4.65 × 1 inches (102 × 118 × 25.4 mm)