Internal All-in-One Card Reader/Writer

5

3If you want the alternate colored bezel, change it now by pressing the plastic clips on each side of the card reader with a pen or pencil and pulling the bezel off, then snapping the new bezel into place.

Push in plastic clips

4Locate a USB connector on the motherboard and make sure the connector is compatible with your card reader’s USB connector.

Pin

Wire color

Function

 

 

 

P5

No contact

No contact

P4

Black/shield

Ground

P3

Green

D+

P2

White

D-

P1

Red

Vbus

5Carefully slide your card reader into the empty 3.5" drive bay.

6Secure your card reader to the drive bay with the four mounting screws (two screws per side).

Screw

Screw