4

DX-CRDRD

Package contents

•Card reader with USB 5-pin cable

•Mounting screws (ISO 3f 4mm) (4)

•Extra front bezel (1)

•Utility CD (includes AP drivers and this User Guide)

•Quick Setup Guide

Minimum system requirements

•IBM-compatible PC

•Pentium 133 MHz or higher processor

•CD drive

•2 MB of hard drive space

•One available on-board 5-pin USB connector on the computer's system board

•One available 3.5-inch drive bay

•Windows® 2000, Windows® XP, Windows® Vista, or Windows® 7

Installing the card reader

Caution: Electrostatic discharge (static electricity) can damage electronic components. Make sure that you are grounded before you install your card reader. Turn off your computer, then touch a bare metal part of your computer, such as the back of the chassis or power supply, to discharge any static electricity.

To install your card reader:

1Turn off your computer and disconnect the power cord.

2Open your computer's cover. For more information, see the documentation that came with your computer.